Customer Snapshot
Industry: Natural gas measurement and manufacturing
Operating Footprint: Utility calibration and compliance operations
Challenge: Slow, fragmented calibration of multi-vendor electronic volume correctors (EVCs)
Solution Type: Automated calibration and compliance testing platform
Key Outcomes: Calibration time reduced, eight devices tested simultaneously, centralized compliance records
Operating Footprint: Utility calibration and compliance operations
Challenge: Slow, fragmented calibration of multi-vendor electronic volume correctors (EVCs)
Solution Type: Automated calibration and compliance testing platform
Key Outcomes: Calibration time reduced, eight devices tested simultaneously, centralized compliance records
How a natural gas utility improved custody transfer testing by implementing a unified Dynamic Test System, reducing electronic volume corrector calibration time from as much as 20 minutes down to 3 minutes while enabling eight devices to be calibrated simultaneously.
The solution consolidated multiple OEM calibration processes and associated records into one platform, helping the customer manage recurring compliance requirements more efficiently.
The Challenge
Natural gas utilities can have tens of thousands of electronic volume correctors, or EVCs, installed throughout their networks. Each device must be recalibrated according to jurisdiction-mandated schedules because it supports custody transfer measurement between the utility and its customers. This can leave hundreds or thousands of devices requiring recalibration annually.
Many utilities rely on internally developed calibration equipment and processes. These approaches can require between three and 20 minutes to calibrate a single EVC and may involve separate procedures for equipment from different manufacturers. Creating a standard approach was complicated by differences in device designs, mounting requirements, software interfaces and calibration parameters.
Many utilities rely on internally developed calibration equipment and processes. These approaches can require between three and 20 minutes to calibrate a single EVC and may involve separate procedures for equipment from different manufacturers. Creating a standard approach was complicated by differences in device designs, mounting requirements, software interfaces and calibration parameters.
What was at Risk?
- Falling out of compliance with jurisdictional calibration requirements
- Incomplete or inconsistent device calibration histories
- Loss of the utility’s ability to sell gas if regulatory requirements were not maintained
- Potential litigation from end users
- Continued inefficiency when recalibrating hundreds or thousands of devices annually
- Reliance on separate processes for EVCs from different manufacturers
Customer Requirements
- Support EVCs from the different manufacturers represented in the utility’s network
- Calibrate multiple devices efficiently and simultaneously
- Accommodate manufacturer-specific mounting and holding requirements
- Provide custom software for calibration and manual parameter entry
- Maintain an accessible history of device calibration and accuracy
- Consolidate information within a common data-logging environment
The Solution
A customised Dynamic Test System was developed to calibrate electronic volume correctors used with rotary gas meters. The system incorporated purpose-built mountings to accommodate the required EVC designs and enabled eight devices to be calibrated simultaneously.
Lakeside developed custom software that allowed devices from multiple OEMs to operate within one calibration environment. The software supported efficient calibration and manual parameter entry while reporting results to a new master data-logging system, giving the customer a common platform for managing devices across its inventory.
The Result
- Reduced EVC calibration time from as much as 20 minutes to as low as 3 minutes
- Enabled the simultaneous calibration of eight EVCs in approximately two to three minutes
- Consolidated multiple manufacturer-specific processes into one device and software environment
- Centralised calibration information within one master historian
- Created compliance records documenting device accuracy and calibration history
- Established a foundation for an additional Dynamic Test System to support the manufacturer’s own production
Why Lakeside
Lakeside translated the customer’s multi-manufacturer requirements into a custom software solution that brought different EVCs into one operating environment. By combining specialised device mountings, simultaneous testing and centralised data logging, Lakeside helped simplify calibration while supporting the records required for custody transfer compliance.
Talk to one of our experts in this field
Contact us for how we can help you and your projects today!