Lakeside’s 8 locations include 6 service and production facilities covering over 60,000+ square feet and includes full machining capabilities with 50+ experienced valve and instrumentation technicians to meet your automation needs. Our service area includes Ontario (excluding the Ottawa Valley), Manitoba, and the Kivalliq region of Nunavut.
All of our locations offer depot and field service repair, allowing for fast and reliable response times. We source only OEM parts and with our in-house machining capabilities, Lakeside is prepared to meet your service needs.
As a member of the Emerson Impact Partner Network, Lakeside is a long-term channel partner with the global leader in automation technology and is the single source solution for leveraging Emerson’s integrated solutions, products, and services. Lakeside leverages the network to provide factory support, technical expertise and a combined inventory of $250 million including the shared resources and equipment of 18 Impact Partners across North America.
The National Board offers the Certificate of Authorization and VR Stamp for the repair of pressure relief valves. Lakeside's in-house testing facilities offer complete refurbishment under the National Board VR program and are certified to repair both ASME Section I & VIII relief valves, which is compliant with TSSA Regulations.
Lakeside has adjusted its processes to some of the highest safety and quality standards in the world. ASME-certified products are reliable and perform consistently, comply with government regulations in more than 100 countries, and are more easily shipped internationally.
The NBIC provides standards for the installation, inspection, and repair and/or alteration of boilers, pressure vessels, and pressure relief devices. The NBBI certification meets all of the requirements of the TSSA in Ontario.
Inspections &Technical Services Manitoba
Certified by Inspections and Technical Services Manitoba - Office of the Fire Commissioner in terms of the repair of pressure relief valves based on the requirements of the NBBI.
Approved by the NBBI (National Board of Boiler and Pressure Vessels Inspectors) for the assembly of safety valves according to the ASME code (American Society of Mechanical Engineers) section VIII on air, water and steam service and section I for valves on steam. This certification meets the requirements of the TSSA in Ontario.
9001:2015 organizations need to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and aims to enhance customer satisfaction through the effective application of the system.
Depot & Field Services
We provide field and in-shop services for all types and brands of valves. We are service ready to support your control, isolation, actuation and safety relief valve needs.
Our Mechanical Service Team is dedicated to delivering reliable, quality, and timely support for your Process Automation Assets. You can trust us to support your needs throughout your assets’ operating life from installation, commissioning, preventative maintenance, troubleshooting and the repair of damaged or deteriorating equipment.
Our factory trained service team performs actuator rebuilds in our facility or in the field, bringing units back to ‘like new’ condition. We offer upgrades and conversions, as well as a 12-month warranty on upgrades and Class A repairs. Lakeside offers on-site control valve, isolation valve, and safety relief valve services, including on-site steam testing and certifications using our AVK (Lift Assist Device), and Asset Management Services.
Lakeside provides quality and consistency with repairs and preventative maintenance (health checks) of manual, pnuematic, electric and electro hydraulic actuators. Recommended spares, drawings and wiring diagrams are available. Start-up and calibration services are also offered.
Our factory and distribution facilities offer valve automation and testing services including custom fabrication for retrofits to existing valves, dampers, or other devices that require automation.
In-shop services include:
Pressure & Seat Leak Testing
Valve & Actuator Repairs
Custom Mounting Configurations
Cleaning (O2 )
Lakeside offers high bay service facilities with a lift capacity of 5 tons, allowing for efficient and safe repair of your assets. With decades of combined experience, our technicians are ready to meet your valve and automation service needs.
Lakeside's in-house testing facilities offer complete refurbishment under the National Board VR program, which is compliant with TSSA Regulations. With sourcing of only OEM parts and in-house machining capabilities, Lakeside is prepared to meet your service needs.
Repairs & Certifications of all Manufacturer’s Relief Valves (Sizes ½” through 8”)
Set Pressures up to 3000 psi
Air, Gas, Steam & Liquid Services
We hold thousands of repair records on relief valves purchased and/or serviced by our experts.
This information can be accessed by customer tag numbers to provide assistance in maintenance planning and emergency repairs. Lakeside's team maintains historical data for your needs.
Asset Management Tools
Track and maintain your assets with our Service Portal. All of your asset information available in one location
Avoid the hassle of lost paperwork, obsolescence issues, undocumented field changes, unidentifiable parts, and misplaced assets
Capture every detail and maintain a complete and historically accurate record of each asset
Features include but not limited to Asset Testing, Report Printing, Creating Tags and Scanning Documents
RFID Tagging & Tracking
Intrinsically safe device that use radio frequency identification (RFID)
Ability to communicate from distance up to 20 feet
Allows Digital Identification and Tracking of Equipment
Diagnostic & Preventive Maintenance
Access to valves and other asset data is integral to an operating facility.
Our expert personnel can provide valve asset audits to generate, maintain and utilize data for use in your facility's maintenance planning activities. Lakeside has the tools and technology to provide accurate valve health analysis through non-intrusive data collection allowing our technicians to troubleshoot and predict valve failures before they happen.
Our service capabilities include:
Comprehensive valve asset walkdown
Maintenance planning activities
Valve diagnostic report generation
Accurate and accessible documentation trails
Remote Assistance Program
Provided through a third-party augmented reality (AR) industrial, secure (ISO27001), and robust platform
Allows you access to real-time troubleshooting support from subject matter experts
Remote assistance helps increase asset uptime and reduce travel costs through instant audio and video conference calls
Increase field worker productivity, situational awareness, and safety with augmented reality technology
Collaborate with Lakeside/Emerson experts
Visualize asset health and process data for efficient troubleshooting
Retain knowledge and accelerate workforce training
Online diagnostic services focus on providing predictive analysis of valves with the intent of identifying potential failures. With early identification of potential issues, our customers are able to act or plan for action before a failure occurs and avoid costly, unplanned downtime
Uncover changes in valve performance over time through the use of Time-series analysis
Drive critical maintenance decisions and schedule maintenance efforts ahead of any unforeseen failures take place
Control Valve Services
Lakeside provides customers with the expertise, technology and processes that can help you operate safely, improve asset reliability, and optimize process capabilities.
Local Certified Service Network
Parts and Spares Availability
Instant Repair and Replacement
Diagnostics and Troubleshooting
Calibration, Repair and Overhaul
Start-Up and Commissioning
Equipment Lifecycle Strategy
Shutdown, Turnaround & Outage Management
Technology Upgrades & Retrofits
Asset Management Strategy
Asset Performance Engineers
Condition Based Monitoring
Control Performance Audits
Gas Hydraulic Actuator Services include:
Field & In-house Services
Startup & Turnarounds
Mechanical Integrity Troubleshooting
Schematic Analysis & Modifications
Factory Trained Expertise
MOV (Motor-Operated Valve) Service Capabilities include:
Disassembled, cleaned, and blasted down to bare metal
Carefully inspected by a factory-trained evaluator using Emerson procedures
Measured to ensure that material conditions and thicknesses are compliant with the original design
Refurbished with genuine OEM parts; every Encore valve receives brand new elastomer components, with other elements replaced if they do not pass OEM inspection criteria
Reserialized as an Encore valve, with records maintained in the OEM database
DCMlink software for deep insight into asset status and performance.