Back To Top
Flexim FLUXUS G736 4-Beam Gas Flow Meter
Flexim FLUXUS G736 4-Beam Gas Flow Meter
Flexim FLUXUS G736 4-Beam Gas Flow Meter
Flexim FLUXUS G736 4-Beam Gas Flow Meter
The FLUXUS G736 gas flow meter combines precision digital signal processing with the well-known advantages of non-intrusive ultrasonic technology: ease of installation, retrofittable design, high accuracy, and outstanding performance.
With 4 ultrasonic transducers operating in reflect mode, 8 independent ultrasonic paths traverse the gaseous medium providing superior flow averaging of up to 4 planes of the pipe section. With this configuration, the G736 flow meter averages out crossflow profile effects and achieves optimum non-intrusive flow compensation for undesirable installation locations where insufficient upstream straight pipe proximity to bends, elbows or other adjacent instrumentation creates flow disturbances.
Flexim FLUXUS G736 4-Beam Gas Flow Meter

Specs

Accuracy
Measurement uncertainty of the measuring system (volumetric flow rate): ±0.3 % of reading ±0,005 m/s (±0.02 ft/s)
Measurement uncertainty at the measuring point (volumetric flow rate): ±1…2 % of reading ±0,005 m/s (±0.02 ft/s)
Certifications/Approvals
FM Class I /Div 2
ATEX/IECEx Zone 2
Communication Protocol
Modbus RTU/TCP
BACnet MSTP/IP
Profibus PA
Foundation Fieldbus
Flow Channels
up to 4
Fluid type
All gases
Input
Temperature
4-20mA active/passive
Output
4-20mA active/passive
4-20mA HART active/passive
pulse/frequency/binary
Pipe size
7 to 1600 mm (0.28 to 63 inch)
Power supply
100-230VAC
11-32VDC
Pressure range
1barg (15 psig) to unlimited
Range
Flow Velocity Range: 0,01…25 m/s (0.03 to 82 ft/s), depending on pipe diameter
Repeatability
0.15 % of reading ±0,005 m/s (±0.02 ft/s)
System configuration and installation
For more detailed Information please download the Technical Specifications
Temperature range (media)
-40 to +240°C (-40 to +464°F) / WI: -200 to +630°C (-328 to +1166°F)

Features

  • Temperature compensated transducers. Our transducers are automatically compensated for ambient temperature changes according to ANSI/ASME MFC-5.1-2011.
  • Easy installation without process interruptions - retrofittable and compact design.
  • Maintenance-free - no moving parts, no wear and tear, gel/grease-free permanent transducer coupling pads.
  • Operational safety - no leak paths, no direct contact with the fluid.
  • Integrated synchronized channel averaging for perfect compensation of inhomogeneous flow profiles.
  • Advanced Meter Verification provides you with detailed information about the meter health status at any time.
  • Integrated disturbance correction.
  • Dynamic Gas Meter for compensation of changing gas compositions.

Education

Interested in attending a training class?

Visit Course Listing