Flexim FLUXUS G532 CA The Compact Compressed Air Flow Meter

Name: Flexim FLUXUS G532 CA The Compact Compressed Air Flow Meter
Brand: Flexim

The Flexim FLUXUS G532 CA compressed air ultrasonic flow meter is specially designed for quantity measurement of compressed air and technical gases.

This compact compressed air meter with integrated standard volume flow calculation can also process online measurement data from temperature and pressure sensors. The proven transit time difference method offers great advantages, especially for compressed air and technical gases. Flow velocities as low as 0.01 m/s (0.03 ft/s) are detected, the measurement is always bi-directional and is not influenced by moisture, oil or dirt particles. The FLUXUS G532 CA has a USB and LAN interface and operates the common communication interfaces Modbus TCP, Modbus RTU, BACnet MS/TP, BACnet IP and M-Bus.

Specs

Accuracy

Measurement uncertainty of the measuring system (volumetric flow rate): ±0.3 of reading ±0.005 m/s ( ±0.02 ft/s)
Measurement uncertainty at the measuring point (volumetric flow rate):: ±1 to 2% of reading ±0.005 m/s (±0.02 ft/s)

Certifications/approvals

Ordloc (FM)

Communication protocol

Modbus RTU

BACnet MS/TP

HART^®

Modbus TCP

M-Bus

BACnet IP

USB

LAN

Flow channels

Fluid Type

Compressed air, industrial, pharmaceutical and clean gases

Input

Temperature
4..20mA

Output

4-20mA active/passive according to NAMUR NE43
pulse/frequency/binary

Pipe size

7…360mm (0,28…14,2 inch)

Power supply

90 to 250 VAC / 50 to 60 Hz

11 to 32 VDC

Pressure range

1 barg (15 psig)...Unlimited

Range

Flow Velocity Range: 0.01...35 m/s (0.03 to 115 ft/s) , depending on the pipe diameter

Repeatability

0.15 % of reading ±0,005 m/s (±0.02 ft/s)

System configuration and installation

For more detailed Information please download the Technical Specifications

Temperature range (media)

-40 to +130°C (-40 to 266 °F)

Features

Non-intrusive compressed air and technical gas flow measurement from 3 bar absolute onwards.
Integrated standard volume flow calculation.
Extreme measurement dynamics from lowest to highest flow velocities - easy detection of leakages and load peaks.
Bi-directional measurement, able to detect back-flow
Simple and cost-effective retrofitting without shut down.
USB and LAN interface.
Communication interfaces Modbus TCP, Modbus RTU, BACnet MS/TP, BACnet IP, M-Bus.
Advanced Meter Verification.