Back To Top
Water Cut Analysis Water Cut Analysis
Whether you have an inlet separator or a group separator, you will need reliable and accurate measurement for your water cut analysis.

Whether you have an inlet separator or a group separator, you will need reliable and accurate measurement for your water cut analysis.

This is required for the allocation of products and produced reporting. Mass, volume flow, density, and temperature are the properties needed for water cut analysis accuracy.

Emerson's Micro Motion flow technology provides a reliable and low maintenance solution for well production separators.

The technology also provides multivariable outputs for mass, volume flow, density, and temperature along with significant diagnostic capabilities for hardware and process problem identification. Density measurement is commonly used to provide inferred water cut calculation, eliminating capital costs of other cut devices.
Choose a reliable and low maintenance solution
Eliminate capital costs of other cut devices
Get in touch with an expert, find your nearest office location, or send us a note about your next project.
TALK TO ONE OF OUR EXPERTS IN THIS FIELD
1-800-265-1005
+