Back To Top


The MODEL 3010BX is AMI’s neXt generation Trace H2S Analyzer. Its patented technologies and superior design make the Analyzer the top pick among engineers and measurement technicians seeking reliable and accurate H2S measurements under harsh conditions.

Model 3010BX Overview

Play Video

Model 3010BX Installation Video

Play Video

Mobel 3010BX Calibration

Play Video
MODEL 3010BX Trace H2S Analyzer


Operational Specifications
Output Ranges (User Selectable)
Standard Ranges
0 – 10 ppm, 0 – 50 ppm, 0 – 100 ppm, 0 – 200 ppm
Optional High Range Sensor
0 – 100 ppm, 0 – 500 ppm, 0 – 1000 ppm, 0 – 2000 ppm
Ambient Operational Temperature
25°F to 115°F, (–3.9°C to 46°C)
–20°F to 115°F, (–29°C to 46°C)
Heated with Extreme Weather Enclosure
–40°F to 115°F, (–40°C to 46°C)
Flow Rate (Recommended)
1.0 to 1.5 SCFH, (0.5 – 0.75 Lpm)
Inlet Gas Pressure
0.5 − 150 psig, (0.03 − 10.3 bar)
Operational Altitude
≤ 5,500 m, (18,000 ft)
≤ 2,500 m, (8,200 ft)
Sensor & Analyzer Performance Specifications
Low Range Sensor
Max Range, 0 –200 ppm
High Range Sensor
Max Range, 0 –2000 ppm
90% Upscale Response Times @ 1.5 SCFH (0.75 LPM) For Specific Ranges
<120 sec for 0 – 100 ppm, <120 sec for 0 – 2000 ppm
±1% of range or ±0.2 ppm of H2S, whichever is greater
Class I, Division 1, Groups C & D, T4, –32°C ≤ Tamb ≤ 46°C, IP 54
Responses to other Gases in the Sample Gas (Given that 100PPM of the Listed Gas is Present)
Methyl Mercaptan (40 ppm), Carbon monoxide (4 ppm), Hydrogen (1 ppm), Sulfur dioxide (18 ppm), Note: For complete list, contact AMI


  • ELIMINATOR CELL BLOCK FOR A LEAK-FREE DESIGN | The patented ELIMINATOR CELL BLOCK provides a unique, compact sample system approach and a flow-efficient sensor pocket, machined into a solid metallic block. Precision cross-drilled intersecting gas passages eliminate the need for long lengths of tubing and leak- prone compression fittings. Additionally, a uniquely engineered 3-way selector valve (Sample/Span/Off), metering valve, pressure sensor and flow meter are all integrated into theELIMINATOR CELL BLOCK. It also provides the user with direct front panel access for installing and replacing sensors without the need for disassembly or tools.
  • DESIGNED FOR THE USER | Intuitive controls, compact size, rugged design make the MODEL 3010BX simple to install and ideally suited for either indoor or outdoor use. The Analyzer’s low power requirements allow even the heated configuration to be powered in remote locations with just a solar panel. High performance and reliability combined with a virtually maintenance free operation makes the MODEL 3010BX a simple, low cost, long term solution for measuring H2S.
  • FULL SUITE OF STANDARD FEATURES | AMI’s MODEL 3010BX Trace H2S Analyzer comes loaded with a full suite of advanced features without the typical ‘up charges’. The standard features include: 4-user selectable analog output ranges, large backlit LCD, dual independent alarm relay contacts, comprehensive alarm logic (fail safe or non-fail safe, latching or non-latching and independent alarm delays), alarm bypass, and 3 levels of security settings. Automatic data logging provides detailed time-stamped records of H2S measurement, gas pressure, temperature, supply voltage and power brown-out history. All these features can be accessed through AMI’s powerful COMMAND CENTER software, which works universally across all AMI analyzers


Interested in attending a training class?

Visit Course Listing